Come scegliere il primo tornio per ceramica

How to choose your first pottery wheel

“I found a wheel on Amazon for €150. I’m tempted.”
“I’d buy a studio wheel, but what do I do with it if I lose interest?”
“Would you go for a Vevor or a Shimpo?”

I hear some version of these questions all the time in the studio. My answer? I’d look for a second-hand Shimpo. Then every so often, one of the students who bought a Vevor after their first lesson drops by with a few pots for me to fire. They’ve set the wheel up in the basement. Small pots, admittedly. But there they are.

I know which wheel I’d buy with my own money. Whether you need to spend over a thousand euros to throw a cup in your basement is another question. Those little pots make a pretty good case.

All right, how much?

Vevor sells tools for everything from woodworking to pottery. Its 28 cm electric wheel costs around €110. Shimpo is a Japanese company that’s been making pottery wheels since the 1950s. It got into them through something it already knew how to do well, which was controlling how fast a machine turns. A new Shimpo Whisper-T costs over €1,300.

After one lesson, I can understand wanting to get straight back on the wheel. I can also understand hesitating over a thousand euros. Even a decent second-hand wheel is a fair bit of money when you’re still working out how much time you’ll have to use it.

One of my Shimpos has been in the studio for twelve years. A few of the others have been here for two. Stand them side by side and you’d be hard pressed to tell which is which. That’s part of the appeal of buying a studio wheel second-hand. Buy one at a fair price and look after it, and years later you might get close to your money back. With a wheel that costs just over a hundred euros new, put yourself in the buyer’s shoes. Would you make the trip to pick up a used one if you could have a new one delivered to the door?

Still, if you want to practise between classes, €110 might be money you can spare now. If you’ve got a corner for a wheel and you want to make cups and little bowls, that’s enough to get going. A few of my students have done just that.

When a pot goes wrong, I’d like to know why

I’ve thrown on a Vevor once. It was enough to know I’d choose something else. It tells you a bit about my taste and next to nothing about how long a whole range of wheels will last. I’ve learned more from the people who bought one. They get on fine with small pots. It’s when they centre a bigger lump of clay that they start to feel the wheel slow down under their hands.

Say you’re learning to centre. You brace your elbows, lean a little harder into the clay and feel the speed change. Did your shoulders tense up? Are you pushing too hard? Or is the motor struggling to hold its speed with that much clay on the wheel? That would drive me mad. When a pot goes wrong, I want a fair chance of figuring out where I went wrong.

Even potters comparing notes online describe quite different things at low speed. One, used to throwing on a Shimpo VL-Lite, says their Vevor will happily hold a slow, steady pace. Another is glad to have a wheel at home, but says theirs keeps turning with the pedal all the way back. To stop it, they have to put the selector in neutral. You’d never spot that in a product photo. If you get to try a wheel, spend a minute at the slow end of the pedal.

Why I use Shimpo Whispers in the studio

I have six Shimpos in the studio. What I like about the Whispers is how seldom I have to think about the wheel. I notice it most when I’m collaring in the neck of a bottle. The neck and the belly turn at the same rpm, but my fingertips are closer to the axis at the neck. Less clay travels past them with each revolution. That’s what a lower tangential speed feels like. As the neck narrows, I give the pedal a little more pressure. The speed comes up smoothly and I can keep my attention on that small stretch of wall between my fingers. A jerky pedal would have me thinking about my foot halfway through.

There’s a less poetic reason, too. The Whisper-T has a 30 cm wheelhead, compared with 35 cm on the RK-3E. For the work I do, 30 cm suits me, including when I want to fit something like a Hartley & Noble bat system. You throw on a removable insert, then lift it out with the pot still on it. The wheel is free for the next one. If you’ve just thrown a dinner plate, you can see the appeal. Before ordering, I’d check how the system attaches to the wheelhead. If it uses bat pins, measure the distance between them as well as the diameter of the wheelhead.

What €110 to €2,500 will buy you

This is an independent article. None of the brands mentioned here has ever contacted me. These are prices for new wheels in November 2026. If you’re comparing two offers, check the delivery charge and which accessories actually come with the wheel.

Pottery wheelApprox. priceWhat you get
Vevor 450 W, 28 cm€111Foot pedal control. Vevor gives a speed range of 60–300 rpm for this model.
Shimpo Aspire RK-5T€599A tabletop wheel weighing 12 kg. Think about the bench you’ll put it on and how high you’ll be sitting.
BTH Sirius BP02About €1,000500 W brushless motor with belt drive, 31.5 cm aluminium wheelhead and a two-piece splash pan held together by magnets.
Shimpo RK-55€1,10430 cm wheelhead and belt drive. A useful point of comparison if you’re looking at wheels around the €1,000 mark.
Shimpo Whisper-T€1,33030 cm wheelhead and a direct-drive motor.
Shimpo RK-3E€2,04335 cm wheelhead and a 400 W motor. If you throw wide forms, you might appreciate those extra five centimetres.
Rohde HMT 600€2,45034 cm wheelhead and adjustable height. The seat and shelf are optional, so check what’s included in the quote.

One Chinese manufacturer worth a look is BTH, which makes the Sirius in Jingdezhen. At around €1,000, I’d want to try it alongside the Shimpo RK-55. On paper you go from 100 watts on the Shimpo to 500 on the BTH. I wouldn’t take that to mean it’s five times as good at centring clay. I’d put the same weight of clay on each wheel, lean into it and feel how it responds, especially as I ease off the pedal. BTH spec sheet · Shimpo RK-55 specifications

I also look at the bits I’ll be handling every day. The splash pan on my Whisper-Ts is plastic and comes apart for washing. The pedal is metal. When I try a pedal, I want to feel whether it stays put under my foot and how much control I have all the way through its travel. The Sirius BP02 spec sheet mentions a Hall-effect sensor in the pedal but doesn’t say what the casing is made of. I remember it being plastic on the one I tried at a trade fair.

How I’d try out a second-hand wheel

Before making the trip, I’d ask the seller for a photo of the model plate. A listing that says “used Shimpo” could cover quite a range of ages, drive systems and prices. An RK-10 turned up on the Italian classifieds site Subito for €330, for instance. That was the asking price for that particular wheel. Before calling it a bargain, I’d want to know what shape it was in and whether I could still get parts for it.

I’d ask if I could bring some of my own clay. First I’d let the empty wheelhead turn slowly and watch the rim from the side. Does it rise and fall with each revolution? Then I’d run the pedal through its full travel and try a few times to find the slow speed I use to finish a rim. If that’s tricky before I’ve even touched the clay, I’d rather find out there.

Then I’d throw a bowl. I’d use an amount of clay I know well, sit the way I normally sit and go through the familiar motions of centring, opening up and pulling a wall. I’d feel if the wheel shifted, if the motor slowed as soon as I leaned in, or if I could ease off the speed with both hands still on the pot. If the wheelhead had a visible wobble or the pedal moved in jumps, I’d leave it there, at least until I knew what it would cost to put right.

A few hours of open studio time before you buy

If you’ve just finished a class and you’re itching to throw again, you can give it a few more sessions before committing to a wheel. Some pottery studios offer open studio time. You book a wheel and work on your own. Ask your local studio how much experience you need, which wheels they have and how they handle firing.

I’d use those hours to throw a shape I already know. The first time, centring might take all my attention. A few sessions later, I start to notice how the pedal feels, whether I’m comfortable at that height and what happens when I use a bit more clay. After a while I’ve also got a better idea of whether I’d use a wheel at home two evenings a week or the odd Sunday. That’s a nice thing to know before spending a thousand euros.

For the way I work, I’d still look for a second-hand Shimpo. But if you’ve just had your first lesson and you’re asking me which wheel to buy, my answer would be to book a few more hours on one. The purchase can wait. You can throw your next bowl at Erra Ceramica’s Open Lab in Milan.